Tất cả sản phẩm

Segments Protective, Marine Availability This product is available world wide.

 Description:  Hempathane HS 55610 is a two-component polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Contains zinc phosphate. Area of use As a VOC-compliant, high-build finishing coat for protection of structural steel in corrosive environment. May be specified as a one coat "Direct To Metal" system in environments classified...

Description A two-component, glossy acrylic polyurethane coating, cured with aliphatic isocyanate, with good gloss and colour retention. Area of use As a finishing coat for protection of structural steel in severely corrosive atmospheric environment, where light-fastness and gloss retention are required. Minimum temperature for curing is -10°C/14°F. Segments Marine, Container

Description Hempadur 85671 is a two-component, amine adduct cured phenolic epoxy (novolac) coating with very good adhesion and high temperature, water and chemical resistance. Area of use As an interior lining in tanks, pipelines etc. for hot water, brine, crude oil, etc. For coating of potable water tanks. As a primer coat in specific painting systems. Segments Marine, Protective

Description A two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion. It has excellent chemical resistance within the pH range 6-9. For service temperature range, see below. Applicable by airless spray. Area of use As a general purpose, heavy-duty, rust-preventing primer. As a single, complete coating for long-term protection...

Description A two-component, medium-zinc, solvent-borne, selfcuring inorganic zinc silicate coating. Applicable by airless spray. Area of use As a general purpose rust-preventing primer in paint systems for long-life protection of steel exposed to moderately to severely corrosive environment. In compliance with SSPC-Paint 20, type 1, level 2. Segments Container, Protective Availability Part of Group Assortment. Local availability...

Description Hempel's Shopprimer ZS 15890 is a two-component, solvent-borne zinc ethyl silicate shopprimer, designed for automatic spray application. Especially suited, where welding (MIG/MAG) and gas-cutting properties are of importance. Area of use For short to medium-term protection of abrasive blast cleaned steel plates and other structural steel during the storage, fabrication, and construction...

Description HEMPADUR AvantGuard 750 is a two-component, activated zinc epoxy primer in compliance with the requirements in ISO 12944 Part 5, 2007 and Level 2, type II in SSPC Paint 20, 2002. Can utilize ASTM D520, type II zinc dust. Area of use As a versatile primer for long-term protection of steel in...

Description A two-component, zinc rich epoxy primer. It cures to a hard wearing and highly weather-resistant coating. Offers cathodic protection of local mechanical damage. Area of use As a "V.O.C.-compliant", versatile, long-term primer on steel for epoxy, vinyl and acrylic coating systems in medium to severely corrosive environments. In complience with SSPC-Paint 20, type...

Description A two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002. Can utilize ASTM D520, type II zinc dust. Area of use As a versatile primer for long-term protection of steel in severely corrosive environments. Segments Protective

Description A two-component zinc rich epoxy paint. It cures to a strong and corrosion resistant coating. Area of use As a "VOC compliant" primer on steel in medium to severely corrosive environment. May be applied on zinc-shopprimed steel, where damaged spots, welds etc. have been power tool cleaned. For on-line application on containers. In compliance with...

Description A two-component polyamide adduct cured, high solids, high build epoxy paint. It forms a hard and tough coating, has good wetting properties and low temperature curing. Area of use As a selfprimed, surface tolerant paint system or as an intermediate or finishing coat in heavy duty paint systems where low VOC and high...

Description Hempadur 47182 is an anticorrosive two-component, modified polyamide adduct cured epoxy. Area of use For atmospheric and immersion service used as a "tiecoat" between epoxy and physically drying coatings. For immersion service it can also replace one anti-corrosive primer coat for the underwater coating system and at the same time act as "tiecoat"...

HEMPADUR 45182 is a two-component, low-temperature curing, modified polyamide adduct cured epoxy. Yellowish grey in colour. For marine and protective use as a "tiecoat" (tackcoat) between epoxy and physically drying coatings. For marine use also as a sealer of old antifouling.  

Description Hempadur Multi-Strength 45751 is a self-priming, two component, high build pure epoxy which cures to an abrasion and corrosion resistant coating. Applicable by standard heavy duty airless spray equipment. Area of use Heavy duty coating for areas exposed to abrasion and aggressive corrosive climate. Hempadur Multi-Strength 45751 is intended for use in warm climates. Segments Marine, Protective

Description An amine-adduct cured epoxy coating - the product is reinforced with Glassflakes. It is a hard, impact and abrasion resistant coating with good resistance to sea water, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products.Suitable for early water exposure and will continue to cure under water. Area of...

Description Hempadur Multi-Strength 35530 is a solvent-free, two-component, high-build, polyamine cured epoxy paint, which cures to a coating with good resistance to fresh water, sea water, crude oil, and to abrasion. Applicable in thick coats by standard heavy duty airless spray equipment. Harmless to grain cargo. Area of use As a heavy duty coating...